99% Solid content odorless polyurethane waterproof coating C003PSHY99

C003PSHY99 Polyurethane Waterproof Coating

ACEPASTE solvent-free odorless single component polyurethane waterproof coating is a reactive moisture cured polymer waterproof coating mainly based on isocyanates and polyether polyols.

By reacting the - NCO end groups in polyurethane prepolymers with moisture in the air, a tough, highly elastic, soft, and seamless waterproof coating is formed on the surface of the substrate.

Auxiliary materials

When the substrate is poor, polyurethane specific single component primer can be used: the primer is a solvent-free system with strong adhesion to the substrate, which can effectively seal the pores of the substrate, especially suitable for loose and porous substrates.

Features

Single component room temperature; Ready to use immediately, can be rollable and sprayable.

No tar, no organic solvents, eco-friendly, odorless, no harm and unpleasant odor during using; Construction operations can also be carried out in poorly ventilated and enclosed spaces;

Durable and comprehensive waterproof, efficient seepage prevention and leakage repair, moisture-proof and mildew proof, water-proof and sealing;

High solid content: with a solid content of over 98%;

Excellent comprehensive performance: chemical reaction film-forming, high tensile strength, high elongation at break,no cracking,excellent resistance to high and low temperatures, water resistance, corrosion resistance, mold resistance, fatigue resistance, and impermeability.

Safe and Environmental protection: Complies with GB/T17219-1998 "Safety Evaluation Standards for Drinking Water Transmission and Distribution Equipment and Protective Materials", and can be used for drinking water tanks.It will not cause pollution to drinking water and its environmental performance far exceeds the limit requirements of harmful substances in building waterproof coatings (JC1066-2008);

One time molding: It can be thick coated and molded in one time without foaming, saving half of the construction time; the thickness can reach 1.2mm at a time and the coating is uniform and dense without pinholes or bubbles;

Fast curing speed: Compared with ordinary single component polyurethane waterproof coatings, the curing speed is twice as fast, and it is more significant at low temperatures;

Wide applicability: can effectively adapt to climate change in hot and cold regions;

Storage security: Free of organic solvents, reduced safety requirements for production, transportation, and storage;

Typical application

Waterproof and moisture-proof of kitchen, bathroom, balcony, roof and other ordinary home decoration;

Seepage prevention and leakage prevention of reservoirs, water towers, water tanks, swimming pools, baths, fountains, reservoirs, sewage treatment pools, drainage and irrigation channels;

Used for leakage and corrosion prevention of basement, underground tunnel, deep well and underground pipeline with good air permeability;

Bonding and moisture-proof of various floor tiles, marble, wood, asbestos, etc.

Main technical parameters

Construction process

1、 Construction preparation

Surface treatment of substrate

-Ensure that the surface of the substrate (such as concrete, cement mortar surface) is flat, solid, and free of defects such as looseness, hollowing, sanding, and cracks. If there are cracks, they need to be filled and leveled with repair materials first.

-Remove dust, oil stains, accumulated water and other debris from the surface of the substrate, and keep it dry (recommended moisture content ≤ 8%).

-The internal and external corners need to be made into rounded corners (with a radius of about 50mm) or obtuse corners, and the nodes such as the pipe root and floor drain need to be reinforced.

Inspection of waterproof coating

-Check if the single component polyurethane waterproof coating is within its shelf life; Due to the possibility of precipitation during long-term storage of waterproof coatings, they can be stirred before use to evenly distribute the sediment (without adding water or other diluents). After stirring, the product performance will not be affected.

2、 Construction steps

Apply the first coat of waterproof coating

-Apply evenly with a brush or roller onto the prepared substrate, with a thickness controlled between 0.8-1mm, ensuring no missed brushing or accumulation.

-Wait for the first coat of waterproof coating to dry (usually 2-4 hours, depending on the ambient temperature and humidity, subject to non stick to hands).

Apply a second coat of waterproof coating

-The direction of the second coating is perpendicular to the first coating (cross coating) to ensure even coverage of the coating, and the thickness is also controlled within 0.8-1mm.

If you need to increase the waterproof thickness, you can apply the third coat after the second coat is dry. The method is the same as above, and the total thickness is recommended to be ≥ 1.5mm. The general construction thickness requirement is 2mm (according to the design requirements).

3. Maintenance and acceptance

After the final coating is completed, it should be naturally cured for more than 72 hours (the curing time should be extended when the temperature is below 10 ℃), and during this period, avoid exposure to rain, water or external damage.

After curing, check whether the coating is flat, without bubbles or cracks. Only after passing the inspection can subsequent construction (such as backfilling, tiling, etc.) be carried out.

Packing specifications

25KG/Bucket

Storage

This product sealed storage, recommended storage temperature of 5~25℃ cool dry place; The storage period is 9 months.

Precautions

Construction environment

-The temperature should be between 5 ℃ and 35 ℃, and construction should be avoided on rainy days, windy days, or when the substrate surface is damp.

Storage

-Sealed storage in a cool and dry place, away from sources of fire and heat, avoid direct sunlight, and use within the shelf life.

Other

-Before the coating is cured, pedestrians and vehicles are prohibited from crushing it to avoid sharp objects scratching the coating.

-If it needs to be used in combination with other materials (such as rolls, primers), compatibility needs to be confirmed and a small-scale test needs to be conducted first.

By following the above method of construction, the waterproof effect of the polyurethane waterproof coating can be fully utilized, effectively resisting water infiltration.