- Silicone Potting Sealant
- Epoxy Potting Sealant
- PU Potting Sealant
- Thermal Conductive Sealant
- EV Battery Adhesive Sealant
Lithium Battery
One-component silicone meets the rework process of the lithium battery frame seal and has good waterproof performance and sealing ability. Silicone provides positioning protection for BMS battery management systems as well as excellent thermal conductivity and electrical insulation.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION | APPLICATION |
SL129 | BMS control module | Silicone | 1K | Moisture cure | PCB coating |
SW 3339 | BMS control module | Silicone | 1K | Moisture cure | PCB coating |
SS8188 | BMS control module | Silicone | 2K | Moisture cure | Pcb board cooling gap filler |
S9339N | Battery case sealing | Silicone | 1K | Moisture cure | Box sealing |
SW8339 | Battery case sealing | Silicone | 1K | Moisture cure | Box sealing |
EE7006 | Battery case sealing | Epoxy | 2K | Heat curing | Box sealing |
PP7216 | Soft package battery potting | Polyurethane | 2K | Heat curing | Potting |
SS0328 | Soft package battery potting | Silicone | 2K | Moisturecure | Potting |
EE7006 | Battery Cells bonding | Epoxy | 2K | Heat curing | Cell bonding |
S7139 | Battery Cells bonding | Silicone | 1K | Moisture cure | Cell bonding |
EE5006 | Solder joint protection | Epoxy | 2K | Heat curing | Potting |
EERF5226 | Solder joint protection | Epoxy | 2K | Heat curing | Potting |
S002PT | Bottom heat sink for Square package battery | Silicone | 1K | Moisture cure | Thermal pad |
Automotive Sensor
The trend toward miniaturization, multi-functionality, integration and intelligence of automotive sensors places higher demands on the new processes and new materials.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION | APPLICATION |
SS0328 | Vacuum booster pressure sensor | Silicone | 2k | Room temperature curing | Potting |
S6449 | Vacuum booster pressure sensor | Silicone | 1k | Room temperature curing | Shell sealing |
S6339 | Vacuum booster pressure sensor | Silicone | 1k | Room temperature curing | Shell sealing |
S6339 | DPS differential pressure sensor | Silicone | 1k | Room temperature curing | Ceramic substrate potting |
ST6339 | DPS differential pressure sensor | Silicone | 1k | Room temperature curing | PA66 sealing and bonding |
EE0226 | Hall effect position sensor | Epoxy | 2k | Heat curing | Shell potting |
EE2016 | Hall effect position sensor/Tire pressure sensor | Epoxy | 2k | Heat curing | Shell potting |
EE2116 | Tire pressure sensor | Epoxy | 2k | Heat curing | Shell potting |
EE4216 | Strain gauge pressure sensor/Temperature Sensor | Epoxy | 2k | Heat curing | Potting |
EE126 | Temperature Sensor | Epoxy | 2k | Heat curing | Induction head potting |
EE4216 | Speed sensor/Transmission pressure sensor | Epoxy | 2k | Heat curing | Potting |
EE2116 | Inductive sensor | Epoxy | 2k | Heat curing | Inductor coil potting |
Electronic Module
Automotive electronic modules include regulators, ignition modules, circuit board three-proof, ECU control modules, charging posts and DC contactors.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION | APPLICATION |
SS5068 | Regulator | Silicone | 2k | Room temperature curing | Pcb chip protection |
S6449 | Regulator | Silicone | 1k | Room temperature curing | Heat sink and shell bonding |
S5449 | Regulator | Silicone | 1k | Room temperature curing | Ceramic substrate and heat sink bonding |
EE126 | Regulator | Epoxy | 2k | Heat curing | Ceramic substrate and heat sink bonding |
SS5068 | Ignition module/ECU control module | Silicone | 2k | Room temperature curing | Pcb board protection |
SS5218 | Ignition module | Silicone | 2k | Room temperature curing | Pcb board fill protection |
SL129 | PCB Conformal coating/ECU control module/Charging pile | Silicone | 1k | Room temperature curing | PCB coating |
PP7216 | ECU control module | PU | 2k | Room temperature curing | PCB potting protection |
S9339N | ECU control module | Silicone | 1k | Room temperature curing | Shell sealing |
S3009 | ECU control module | Silicone | 1k | Room temperature curing | Shell sealing |
SS21-0328 | Charging pile | Silicone | 2k | Room temperature curing | Inductive potting |
S002TP | Charging pile | Silicone | 1k | Room temperature curing | Inductor cooling protection |
EE5226 | DC contactor | Epoxy | 2k | Room temperature curing | Potting protection |
Automotive Display
LCD and TP lamination, recommended to use two-component silicone gel, optical grade transparence material, which can be combined with the various of LCD display modules.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION | APPLICATION |
SS2068 | LCD and TP lamination | Silicone | 2k | Room temperature curing | Frame sealing |
S5009 | LCD and TP lamination | Silicone | 1k | Room temperature curing | Frame sealing |
Automotive Air Conditioner
PTC heater bonding in automotive air conditioners, one-component addition curing adhesiveis recommended. Potting of resistors is recommended for two-component polyurethane encapsulants.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION | APPLICATION |
S5449 | PTC Heater | Silicone | 1k | Room temperature curing | Thermal bonding |
SS1237 | Resistor | Silicone | 2k | Room temperature curing | Cavity filling |
PP8066 | Resistor | PU | 2k | Room temperature curing | Potting |
- INDOOR LIGHTING
- OUTDOOR LIGHTING
- EXPLOSION PROOF LIGHT
- LED POWER SUPPLY
- AUTOMOBILE HEADLIGHTS
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION | APPLICATION |
S9339 | Bulb | Silicone | 1k | Room temperature curing | Shell bonding |
SS0328 | Bulb | Silicone | 2k | Room temperature curing | PCB Potting |
S5211 | Bulb | Silicone | 1k | Room temperature curing | Aluminum substrate cooling |
EERF5226 | T8 tube | Epoxy | 2k | Heat curing | Plug bonding |
S 1-9339 | T8 tube | Silicone | 1k | Room temperature curing | Light bar bonding |
SS0358 | Filament lamp | Silicone | 2k | Room temperature curing | Base bonding |
SS0528 | Filament lamp | Silicone | 2k | Room temperature curing | Filament Potting |
S5211 | Downlight | Silicone | 1k | Room temperature curing | PCB board heat conduction |
PRODUCT | APPLICATION | CATEGORY | TYPE | CURING CONDITION |
SS5218 | Line lights Seal lamp surface | Silicone | 2k | Room temperature curing |
SS0528 | Line lights Seal lamp surface | Silicone | 2k | Room temperature curing |
S3009 | Line lights/Underground light/End cap seal | Silicone | 1k | Room temperature curing |
S6009 | Line lights/Glass cover plate bonding | Silicone | 1k | Room temperature curing |
SS0328 | Line lights/Power supply potting | Silicone | 2k | Room temperature curing |
S9339 | Food light//Underground light/Glass cover plate bonding | Silicone | 1k | Room temperature curing |
S5211 | Food light/Aluminum substrate cooling | Silicone | 1k | Room temperature curing |
S043 | Food light/Aluminum substrate cooling | Silicone | Gasket | Thermmate |
E2-8016 | Underground light/Scrub effect potting | Epoxy | 2k | Room temperature curing |
Inert gas lighting and new led explosion-proof lighting have different high temperature lifetimes. Under the requirements of high explosion-proof, CHANGING adhesive has a comprehensive solution from the aspects of structural bonding, protective sealing and heat medium selection
PRODUCT | APPLICATION | CATEGORY | TYPE | CURING CONDITION |
S9339 | Explosion-proof lamps /Glass cover bonding | Silicone | 1k | Room temperature curing |
S5211 | Explosion-proof lamps/ Aluminum substrate cooling | Silicone | 1k | Room temperature curing |
PPKK1066 | Explosion-proof lamps/ Threading hole plugging | Polyurethane | 2k | Room temperature curing |
PRODUCT | APPLICATION | CATEGORY | TYPE | CURING CONDITION |
SS0328 | LED power supply/ PCB Potting | Silicone | 2k | Room temperature curing |
S3009 | LED power supply/Threading groove sealing | Silicone | 1k | Room temperature curing |
ST1909 | LED power supply/Solder joint isolation | Silicone | 1k | Room temperature curing |
SB6909 | LED power supply/Solder joint isolation | Silicone | 1k | Room temperature curing |
For safety reasons, automotive lights are more demanding for volatility and moisture resistance. The low-volatility and long-term high temperature sealant is the advantage of our silicone sealant.
PRODUCT | APPLICATION | CATEGORY | TYPE | CURING CONDITION |
S6339 | Automotive industry/Shell and lamp shade bonding | Silicone | 1k | Room temperature curing |
S223 | Automotive industry/Shell and lamp shade bonding | Silicone | 1k | Room temperature curing |
SSRF5226 | Automotive industry/Fixed for wiring harness connectors | Silicone | 2k | Room temperature curing |
Power module
There are many types of electronic modules, common types of power modules, power modules, current or voltage regulator modules, IGBT modules, field effect modules, rectifier modules, IPM modules, PIM modules, thyristor modules, and frequency conversion modules.
PRODUCT | APPLICATION | CATEGORY | TYPE | CURING CONDITION |
S8078 | IGBT/Thyristor/Silicon controlled rectifier/Chip potting protection | Silicone | 1k | Room temperature curing |
S6449 | IGBT/Thyristor/Silicon controlled rectifier/Bonding of heat dissipation plate and housing | Silicone | 1k | Heat curing |
S5449 | IGBT/Thyristor/Silicon controlled rectifier/Bonding of ceramic substrate and heat sink plate | Silicone | 1k | Heat curing |
EERF5226 | Thyristor/Silicon controlled rectifier/Terminal potting and fixing | Epoxy | 2k | Heat curing |
High-temperature thermosetting one-component epoxy adhesive meets the requirements for sealing of Transistor holes package. The silicone plays a key role in bonding the growth barrier line and the Chips bonding.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
E8866 | Transistor/Hole sealing | Epoxy | One-component | Room temperature curing |
E51-8866 | Transistor/Hole sealing | Epoxy | One component | Room temperature curing |
SPM0021 | Tantalum capacitor/Primer | Silicone | One-component | Room temperature curing |
SS2-8778 | Tantalum capacitor/Barrier line | Silicone | Two-component | Room temperature curing |
S6449 | Automotive industry/Chip adhesive | Silicone | One-component | Room temperature curing |
Electromagnetic sensor
The encapsulant will satisfies the requirements of good softness and adhesion in electromagnetic sensors. The excellent bonding property, bright surface and moderate toughness will be customized according to the size of sensors, which is the characteristics of the products and services.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
EEK22016 | Induction door lock/Potting | Epoxy | Two-component | Heat curing |
SS0328 | Induction door lock/Hall sensor/Current sensor Potting | Silicone | Two-component | Room temperature curing |
PP6066 | Induction door lock/Potting | Polyurethane | Two-component | Room temperature curing |
PP6857 | Hall sensor/Current sensor /Potting | Polyurethane | Two-component | Room temperature curing |
SS5218 | Hall sensor/Current sensor/Potting | Silicone | Two-component | Room temperature curing |
EE3116 | Temperature Sensor Potting | Epoxy | Two-component | Heat curing |
S1011 | Temperature Sensor/Thermal conductivity | Silicone | One-component | Room temperature curing |
Pressure Sensor
Potting compound meets excellent adhesion, good waterproof and moisture resistance, excellent electrical insulation and stability in pressure sensors.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
E03-8866 | Pressure Sensor/Shell bonding | Epoxy | One-component | Heat curing |
SS6068 | Pressure Sensor / Potting | Silicone | Two- component | Room temperature curing |
S0249 | Pressure Sensor / Potting | Silicone | One-component | Room temperature curing |
EE7-YJ2-1126 | Pressure Sensor Cover bonding | Epoxy | Two-component | Room temperature curing |
S0609 | Pressure Sensor/Coating | Silicone | One-component | Room temperature curing |
SS0328 | Throttle sensor//Tire pressure sensor /Potting | Silicone | Two-component | Room temperature curing |
SB2019 | Tire pressure sensor/Sealing | Silicone | One-component | Room temperature curing |
SS2-7078 | Tire pressure sensor/Potting | Silicone | Two-component | Heat curing |
SS6078 | Load cell / Potting | Silicone | Two-component | Room temperature curing |
S9339 | Load cell/Sealing | Silicone | One- component | Room temperature curing |
S0609 | Load cell / PCB coating | Silicone | One- component | Room temperature curing |
PP8108 | Load cell / Chip protection | Polyurethane | Two- component | Room temperature curing |
EE5-0226 | Pressure Switch / Potting | Epoxy | Two-component | Heat curing |
EE51-8866 | Pressure Switch / Potting | Epoxy | One component | Heat curing |
Distance sensor
The distance sensor includes a parking sensor and a displacement sensor. Liquid level sensor, photoelectric sensor.
We will provide different solutions which is based on different sensor requirements.
PRODUCT | APPLICATION | CATEGORY | TYPE | CURING CONDITION |
SS0328 | Reversing radar/Potting | Silicone | Two-component | Room temperature curing |
S3339 | Reversing radar/Sealing | Silicone | One component | Room temperature curing |
SS1028 | Reversing radar/Potting | Silicone | Two-component | Room temperature curing |
EE2016 | Displacement sensor/Potting | Epoxy | Two-component | Heat curing |
SS0328 | Displacement sensor/Temperature resistance potting | Silicone | Two-component | Room temperature curing |
EE3116 | Liquid level sensor/Potting | Epoxy | Two-component | Heat curing |
EE0226 | Liquid level sensor/Potting | Epoxy | Two-component | Heat curing |
PP0206 | Photoelectric Sensor/Soft potting | Polyurethane | Two-component | Heat curing or Room temperature curing |
EEE0116 | Photoelectric Sensor/Potting | Epoxy | Two-component | Heat curing |
PP8108 | Photoelectric Sensor/Potting | Polyurethane | Two- component | Room temperature curing |
Control module
In the control module, the adhesive is mainly used in the potting of the control power supply and the controller, beginor high-heat-conductive, flame-retardant potting compound plays a key role.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
S9339N | Power Control/Box cover sealing | Silicone | One-component | Room temperature curing |
S0249 | Power Control/Box cover sealing | Silicone | One component | Room temperature curing |
SS0328 | Power Control/Controller/Flame retardant thermal conductivity potting | Silicone | Two-component | Room temperature curing |
PP7216 | Power Control/Controller/Potting | Polyurethane | Two-component | Room temperature curing |
S7609 | Power Control/Conformal coating | Silicone | One-component | Room temperature curing |
S0609 | Controller/Conformal coating | Silicone | One-component | Room temperature curing |
SL129 | Controller/Conformal coating | Silicone | One-component | Room temperature curing |
Instrumentation
In order to ensure the precision of instrumentation,
we has proposed a total solution for instrumentation applications, such as PCB protection, coil fixing, circuit board potting, and lead sealing.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
SS0328 | Electromagnetic instrument/Wiring sealing | Silicone | Two-component | Room temperature curing |
PP216 | Electromagnetic instrument/Wiring cavity filling | Polyurethane | Two-component | Room temperature curing |
PP0206 | Electromagnetic instrument/Coil fixing | Polyurethane | Two-component | Room temperature curing |
SSN9339 | Electromagnetic instrument/PCB potting | Silicone | Two-component | Room temperature curing |
SS2009 | Electromagnetic instrument/PCB coating | Silicone | Two-component | Room temperature curing |
EE8116 | Smart water meter/Threading plugging | Epoxy | Two-component | Heat curing |
SS6078 | Smart water meter/PCB coating | Silicone | Two-component | Room temperature curing |
SS01-8078 | Smart water meter/Waterproof protection | Silicone | Two-component | Heat curing |
SS3009 | Smart water meter/Lead sealing | Silicone | Two-component | Room temperature curing |
S5909 | Smart water meter/Lead sealing | Silicone | One component | Room temperature curing |
Transformer
Adhesive is an indispensable part of transformer it will keep them safe and reliable.
PRODUCT | APPLICATION/EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
EE2016 | Electronic transformer/Potting | Epoxy | Two-component | Heat curing |
EE2116 | Electronic transformer/Flame retardant potting | Epoxy | Two-component | Heat curing |
EE5006 | Electronic transformer/Magnetic steel sheet bonding | Epoxy | Two-component | Heat curing |
EEYJ2-1126 | Electronic transformer/End cap | Epoxy | Two-component | Heat curing |
Electromagnetic induction module
There are many kinds of electromagnetic induction modules.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
S6339 | Electric welder/Component fixing | Silicone | One component | Room temperature curing |
S3019 | Electric welder/Component fixing | Silicone | One component | Room temperature curing |
EE 5016 | Electric welder/Coil thermal sealing | Epoxy | Two-component | Heat curing |
EE3116 | Electric welder/Coil thermal sealing | Epoxy | Two-component | Heat curing |
SB2019 | Reactor End cap | Silicone | One component | Room temperature curing |
EE1126 | Reactor End cap | Epoxy | Two-component | Heat curing |
EE3116 | Reactor Potting | Epoxy | Two-component | Heat curing |
PP7216 | Reed switch Potting | Polyurethane | Two-component | Room temperature curing |
EE2016 | Reed switch Potting | Epoxy | Two-component | Heat curing |
E51-8866 | Relay Plastic sealing | Epoxy | One component | Heat curing |
EE2116 | Mutual inductor Potting | Epoxy | Two-component | Heat curing |
EE5226 | Mutual inductor Potting | Epoxy | Two-component | Heat curing |
EE2016 | Permanent magnet sucker/Wear-resistant potting | Epoxy | Two-component | Heat curing |
SSR0038 | Permanent magnet suckerCoil potting | Silicone | Two-component | Room temperature curing |
PP7216 | Resistor Sealing filling | Polyurethane | Two-component | Room temperature curing |
S3019 | Resistor Square resistance potting | Silicone | One component | Room temperature curing |
S2009 | Resistor/Tubular sealing | Silicone | One component | Room temperature curing |
EE5-0226 | Resistor/Air conditioning resistance potting | Epoxy | Two-component | Heat curing |
Optical Fiber Connector
Mainly used in Pvc wire harness sealing and bonding and ABS junction box encapsulation.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
PP7216 | Optical fiber connector/Pvc harness sealing and bonding | Polyurethane | 2k | Room temperature curing |
EE5006 | Optical fiber connector/ABS junction box bonding | Epoxy | 2k | Heat curing |
Power Connector
In low-pressure connectors and high-pressure connector potting, we provide different solutions depending on their characteristic.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
SS0178 | Low Voltage Connector/Filled waterproof junction box potting | Silicone | 2k | Room temperature curing |
S01-8078 | Low Voltage Connector/Filled waterproof junction box potting | Silicone | 1k | Room temperature curing |
SS2028 | Low Voltage Connector/Sealed waterproof junction box | Silicone | 2k | Room temperature curing |
SS1058 | Low Voltage Connector/Sealed waterproof junction box | Silicone | 2k | Room temperature curing |
EEKK1066 | High Voltage Connector/Junction box potting | Epoxy | 2k | Heat curing |
PP7216 | High Voltage ConnectorJunction box potting | Polyurethane | 2k | Room temperature curing |
Aerospace Connector
For the sealing of temperature resistance of aerospace connector welding, it is recommended to use two-component epoxy potting compound.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
PP5026 | Aerospace connector/Welding temperature resistant seal | Polyurethane | 2k | Room temperature curing |
PP2096 | Aerospace connector/Welding temperature resistant seal | Polyurethane | 2k | Room temperature curing |
PP0226 | Aerospace connector/Welding temperature resistant seal | Epoxy | 2k | Heat curing |
Automotive Connector
Airtight seals for wire harnesses in automotive connectors are recommended for silicone gels and two-component polyurethane potting compounds.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
SS7078 | Automotive connector/Wire harness hermetic sealing | Silicone | 2k | Room temperature curing |
PP7216 | Automotive connector/Wire harness hermetic sealing | Polyurethane | 2k | Room temperature curing |
EERF5226 | Automotive connector/Leakproof terminal fixing | Epoxy | 2k | Heat curing |
Automotive Motor
In automotive motors, the adhesive must meet the requirements of waterproofing, secondary insulation, etc., in order to ensure that the car remains stable in harsh environments and road conditions.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
EE5226 | Automotive motor/Stator potting | Epoxy | 2k | Heat curing |
EE126 | Automotive motor/Magnetic steel tile bonding | Epoxy | 2k | Heat curing |
S0249 | Automotive motor/Motor cover sealing | Silicone | 1k | Room temperature curing |
Wind Energy Motor
Wind resource is the inexhaustible treasure of the country. we has a wide range of applications from the bonding of the blades in the wind field and the insulation protection of the motor.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
PP7-5925 | Wind energy motor/Stator potting | Polyurethane | 2k | Room temperature curing |
EE2-7156 | Wind energy motor/Rotor potting | Epoxy | 2k | Heat curing |
S 0939 | Wind energy motor/Motor compartment sealing | Silicone | 1k | Room temperature curing |
SS 9339N | Wind energy motor/Rotor coating repair | Silicone | 2k | Room temperature curing |
Industrial Motor
Epoxy Adhesives fixed and bond the rotor to reduce the noise, prevent loss and possible media impact, and extend rotor life.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
EE5226 | Industrial motor/Stator potting | Epoxy | 2k | Heat curing |
EE3116 | Industrial motor/Stator potting | Epoxy | 2k | Heat curing |
EE126 | Industrial motor/Magnetic steel tile bonding | Epoxy | 2k | Heat curing |
INDUSTRIAL FILTER
Polyurethane potting compound is FDA-approved, resistant to acid and alkali, hydrolysis, low mixing viscosity, low heat release, strong bonding with plastics, metals, etc., with a humidity below 25%, low cost.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
EE1-8016 | Curtain filter membranes/Membrane wire fixed | Epoxy | 2k | Heat curing |
SSW5318 | Curtain filter membranes/Membrane protection | Silicone | 2k | Room temperature curing |
EE0226 | Column filter membranes /Component base bonding sealing | Epoxy | 2k | Heat curing |
EE1-2126 | Column filter membranes/Component base bonding sealing | Epoxy | 2k | Heat curing |
Air filter
We offers polyurethane potting compound, one-component sealant, high temperature resistant glue and jelly gel. It has good temperature resistance, good flow and strong adhesion. It is widely used in air filter for high temperature sealing and potting function.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
SW8339 | High efficiency air filter/ Filter membrane and the base bonding and fixed | Silicone | 1k | Room temperature curing |
SR8339 | High efficiency air filter/Filter membrane and the base bonding and fixed | Silicone | 1k | Room temperature curing |
Oil Filter
Two-component epoxy potting compound 0226, resistant to moisture, dirt and other atmospheric components, high strength, excellent adhesion, good anti-contamination, no curing by-products.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
EE0226 | Automotive oil filtration/End cap bonding | Epoxy | 2k | Heat curing |
POWER SYSTEMS ADHESIVE SOLUTIONS
Photovoltaic Power Generation
The world needs energy, and the sun can provide us with inexhaustible energy for free. Therefore, in the era of promoting environmentally friendly energy, the photovoltaic industry plays an increasingly important role.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
PP255 | Photovoltaic controller/PCB potting | Polyurethane | 2k | Room temperature curing |
SS0328 | Photovoltaic controller/PCB potting | Silicone | 2k | Room temperature curing |
SS3-0328 | Photovoltaic controller/PCB potting | Silicone | 2k | Room temperature curing |
S7609 | String inverter/Control board coating | Silicone | 1k | Room temperature curing |
S6339 | String inverter/Component fixing | Silicone | 1k | Room temperature curing |
SS0328 | String inverter/Inductive potting | Silicone | 2k | Room temperature curing |
SS3-0328 | Optimizer Potting | Silicone | 2k | Room temperature curing |
SS0328 | Optimizer Potting | Silicone | 2k | Room temperature curing |
SB6909 | Optimizer Transformer fixing | Silicone | 1k | Room temperature curing |
S6909 | Micro inverter/Cover seal | Silicone | 1k | Room temperature curing |
SS4-0328 | Micro inverter/Waterproof potting | Silicone | 2k | Room temperature curing |
SW9339N | Micro inverter/Antenna sealing | Silicone | 1k | Room temperature curing |
S1-9339 | Panel Sealing | Silicone | 1k | Room temperature curing |
S7609 | Panel coating | Silicone | 1k | Room temperature curing |
S1-9339 | Junction box bonding | Silicone | 1k | Room temperature curing |
Power and Accessories
Silicone grease is an integral part of the puncture clamp, and high-performance greases enhance reliable lubrication protection. High performance grease with very low freeness and good lubricating effect.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
S592 | Piercing Connector/Lubrication protection | Silicone | 1k | Room temperature curing |
Thermal power generation
The anti-corrosion solution can greatly reduce the corrosion from the positive pressure acid on the inner wall of the chimney, greatly extending the service life and maintenance period of the chimney.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
SS032 | Power station chimney/Resistance to high temperature humidity acid | Silicone | 2k | Room temperature curing |
Silicone is the preferred material which can optimizing the kitchen appliances when during producing, like microwave oven, oven, electric stove, range hood, disinfection Cabinet, refrigerator, dishwasher, electric cooker, bathroom heater, water heater, ventilation, heating systems. After curing, Silicone is safe in ecology and physiology, suitable for food contact applications, and even used for molding like chocolate and Popsicle making.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
SR2019 | Electric iron/Sink sealing | Silicone | 1k | Room temperature curing |
SR2019 | Electric iron/Floor bonding | Silicone | 1k | Room temperature curing |
S0609 | Air conditioner/Bath heater/Vacuum cleaner/PCB coating | Silicone | 1k | Room temperature curing |
E8166 | Television/Low temperature epoxy for backlight modules | Epoxy | 1k | Heat curing |
PP0906 | Vacuum cleaner/Control board motor bonding | Polyurethane | 2k | Room temperature curing or Heat curing |
EE2116 | Electric blanket//Fitness machine/Control panel potting | Epoxy | 2k | Heat curing |
Kitchen Appliance
In terms of simple isolation safety function, silicone, epoxy resin, polyurethane sealant and potting adhesive are all waterproof, confidential and easy to repair, making them suitable for air conditioners, TV, bath heater, vacuum cleaners, massage chairs, fitness machines, electric blankets and so on.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
S6629 | Microwave oven/Floor bonding | Silicone | 1k | Room temperature curing |
S6019 | Microwave oven/Glass door bonding | Silicone | 1k | Room temperature curing |
S6019 | Rice cooker/Heating base bonding | Silicone | 1k | Room temperature curing |
S5629 | Rice cooker/Heating base bonding | Silicone | 1k | Room temperature curing |
S9339N | Rice cooker/Heating base bonding | Silicone | 1k | Room temperature curing |
S3019 | Oven/Door sealing | Silicone | 1k | Room temperature curing |
S6019 | Disinfection cabinet/Door sealing | Silicone | 1k | Room temperature curing |
S6019 | Disinfection cabinet/Hand bonding | Silicone | 1k | Room temperature curing |
S3019 | Water heater/Heating pipe plug bonding | Silicone | 1k | Room temperature curing |
S0249 | Water heater/Heating pipe plug bonding | Silicone | 1k | Room temperature curing |
S2111 | Water heater/Combustion chamber cooling grease | Silicone | 1k | Room temperature curing |
S8019 | Kitchen ventilator/Glass cover bonding | Silicone | 1k | Room temperature curing |
SS0358 | Coffee pot/Glass and base bonding | Silicone | 2k | Room temperature curing |
S9339N | Coffee pot/Glass and base bonding | Silicone | 1k | Room temperature curing |
S6019 | Coffee pot/Heating coil bonding | Silicone | 1k | Room temperature curing |
S8019 | Cooker/Glass cover bonding | Silicone | 1k | Room temperature curing |
Consumer Electronics
In handheld devices,we provide comprehensive solutions such as: LCD and TP lamination, camera module assembly bonding, UBS waterproof sealing, speaker sealing, PCB coating, power device cooling. Excellent and reliable performance is the best choice for living electronic equipment.
PRODUCT | APPLICATION EXAMPLE | CATEGORY | TYPE | CURING CONDITION |
SS8-8078 | LCD and TP lamination/Touch screen and LCD screen bonding | Silicone | 2k | Room temperature curing |
SS2068 | LCD and TP lamination/Touch screen and LCD screen bonding | Silicone | 2k | Room temperature curing |
S41-1B2019 | Type C connector/PIN pin bonding | Silicone | 1k | Room temperature curing |
EERF5226 | Camera module/Lens and base bonding | Epoxy | 2k | Heat curing |
EE2116 | Speaker/Internal device potting | Epoxy | 2k | Heat curing |
S6139 | Heat Sink of Power device/Component heat bonding | Silicone | 1k | Room temperature curing |
S2111 | Heat Sink of Power device/Component heat sinking | Silicone | 1k | Room temperature curing |
S5211 | Heat Sink of Power device/Component heat sinking | Silicone | 1k | Room temperature curing |
Sl129 | PCB Conformal coating/PCB coating | Silicone | 1k | Room temperature curing |
S0609 | PCB Conformal coating/PCB coating | Silicone | 1k | Room temperature curing |
(1) For your own use
(2) For Wholesale or Retail
2, What or what materials you will bond or seal? What field is it？
(1) Automotive
(2) Construction
(3) Electronics
3, What's your requirements to the product?
2, You can provide Express Account for receiving samples or pay the freight to CHANGING.
3，Please provide the shipping address and the information of the consignee
the sample test data to CHANGING.
2, If it's passed, we will negotiation more detail of cooperation and move it forwarder to the trial order.
2, If it's failed, our technician need to adjust the products and start over for test.
2, Communication of details of each order.
3, Adjust the cooperation strategy according to the market situation
![WECHAT](javascript:Site.hoverQrCode("//24880169.s21i.faiusr.com/2/ABUIABACGAAguY6DwAYoxJuG-wYwtwY4xwY.jpg",this,{"tips":"Please scan the QR code"});){kind=link}